Spread ice control materials quickly and easily with an efficient Hiniker Spreader. Private users and municipalities will benefit from the labor saving efficiency of the wide 25 ft.spread pattern. And a big 1.50 yard capacity means you'll spend your time productively, rather than constantly reloading.
HOPPER: Formed and welded with continuous electric seam welding on the inside of hopper. The top edge is formed for rigidity. Side slope of 45 degrees allows smooth material flow. An adjustable self-Locking feed gate with lever is standard.
SPINNER: 14-gauge spinner chute assembly with three external adjustable material deflectors provided to control spread pattern. Spinner disc is 12-inch diameter with three welded fins. Spinner shaft of 3/4" diameter steel is mounted with sealed, self-aligning bearing.
CONVEYOR DRIVE: Briggs & Stratton Intek OHV air-cooled, single cylinder, four-cycle engine is mounted on the rear of the spreader. The engine is equipped with an air cleaner, 12V battery, 12V electric starter, and electric throttle control. An in-cab control panel has engine start, shut-off, throttle, and clutch control functions. A hinged engine hood fully encloses the engine. An electric clutch engages and disengages the drive sprocket. Power is transferred to the gear case through roller chain and sprockets
GEAR CASE: The conveyor gear case has a cast-iron housing. A precision-machined, hardened and ground steel worm gear drives a heavy-duty bronze spur gear. Both gears and bearing run in oil and are sealed from contaminants.
CONVEYOR: Heavy-duty, self-cleaning, heat-treated pintle chain with 24,000 lb. tensile strength. Two screw-type adjusters are provided to take up chain slack.
Hiniker control console includes: Control of Starter, Throttle and clutch functions.
The 825 includes a convenient swing-away spinner chute for easier unloading unused material and easy trailer hitch access. Must order a Spinner Assembly to complete the Spreader system.
Please call to place an order, check stock levels, delivery time frame, and shipping charges.
- Model: 625
- Corrosion-resistant Stainless Steel Construction
- 10.5 HP Briggs & Stratton Intek AVS OHV engine
- 1.5 cubic yard level capacity
- Length: 97" overall and 78" for the hopper
- Top Width: 50.5"
- Maximum application rate: 7.3 cu ft/minute
- Optimally sized for use in 6.5 ft pickup bed
- Steel hopper screens: Optional part number: 79202391
- Removable Hopper Cover Tarp: Optional part number: 79203036
- Spinner assembly not included
To order a complete Hiniker Spreader system you must purchase a Base Unit and One Spinner Assembly, (79202387 or 79202388).
To order a complete Hiniker Snow Plow system you must purchase a Plow, a Mounting kit, and a Headlight adapter kit.
This snow plow is only available for purchase and pickup at one of our 5 locally owned Kansas City service centers.