$4.95
$20.95
$2.95
$9.95
$3.45
$49.95
$19.95
$13.95
$35.95
$33.95
$18.95
$138.95
$4.45
$5.95
$37.95
$30.95
$110.95
Was:
$3.45
Now:
$2.76
$3.45
$24.95
$4.45
$5.95
$64.95
$4.95
$4.95
$4.45
$4.95
$4.45
$5.95
$2.95
$0.99
$0.67
$0.84
$45.95
$3.95
$3.45
$4.95
$4.45
$3.95
$3.95
$2.95
$3.95
$2.45
$1.95
-
12CLN --- Wheel Nut 1/2" - 20 Right Hand
Lug Nut - Acorn style - Closed End Chrome Plated 3/4" Across Flats 1/2" - 20 Right Hand Thread 1-3/8" TallAdd to Cart$4.95 -
12WL --- Wheel Lock Set 1/2"
1/2" Wheel Lock Set 1/2" Wheel Lock SetAdd to Cart$20.95 -
Curt
132624 --- Knurled Drive-In Stud - 9/16"
Drive-In Stud - Lippert Thread Diameter (A): 9/16"-18 Stud Length (B): 2.31" Spline Length (C): .588" Base Length (D): .625" Spline Diameter (E): .617" Head Diameter: 0.77" Overall Length: 2.5" Finish: Zinc coatedAdd to Cart$2.95 -
165981 --- Knurled Drive-In Stud - 1/2"
Drive-In Stud Thread Diameter (A): 1/2" Stud Length (B): 1-5/8" Spline Length {C}: .28" Base Length (D): .60" Spline Diameter (E): .62"Add to Cart$9.95 -
165994 --- Knurled Drive-In Stud - 1/2"
Drive-In Stud Thread Diameter (A): 1/2" Stud Length (B): 1-15/16" Spline Length (C): .27" Base Length (D): .52" Spline Diameter (E): .54"Add to Cart$3.45 -
Lippert
2025027411 --- Wheel Lug Stud; 5/8"-18 x 3.44" - .689" Knurl - 10 pack
Wheel Stud - 5/8" - Pack of 10 Replacement wheel lug studs For 5,200 to 7,000-lb. axles Thread size: 5/8"-18 UNF Length: 3-7/16" from underhead to end Knurl Diameter: 0.689" Finish: Yellow Zinc Plated Quantity: Pack of 10Add to Cart$49.95 -
Lippert
2025027412 --- Wheel Lug Stud; 9/16"-18 x 2-5/16" - .617" Knurl - 10 pack
Wheel Stud - 9/16" - Pack of 10 Replacement wheel lug studs For 5,200 , 6,000 and 7,000 hubs Thread size: 9/16"-18 UNF Length: 2.31" from underhead to end Knurl Diameter: 0.617" Finish: Zinc Plated Quantity: Pack of 10Add to Cart$19.95 -
Lippert
2025027413 --- Wheel Lug Stud; 1/2"-20 x 2" - .617 Knurl - 10 pack
Wheel Stud - 1/2" - Pack of 10 Replacement wheel lug studs For 2k thur 7k hubs Thread size: 1/2"-20 UNF Length: 2" from underhead to end Knurl Diameter: 0.617" Finish: Zinc Plated Quantity: Pack of 10Add to Cart$13.95 -
Lippert
2025027414 --- Wheel Lug Stud - 9/16"-18 x 2-5/16" - .689" - 10 pack
Wheel Stud - 9/16" - Pack of 10 Type: Wheel bolt Diameter: 0.689" knurl Shoulder length: 2-5/16" Thread end: 9/16"-18 Quantity: Pack of 10 Finish: Yellow Zinc Plated Suggested nut #2025027778Add to Cart$35.95 -
Lippert
2025027415 --- Wheel Lug Stud 5/8"-18 x 2.75" - .689" Knurl - 10 Pack
Trailer Axle Wheel Bolt - 5/8" - Pack of 10 Diameter of Thread: 5/8"-18 Shoulder Length: 2-3/4" Diameter of Knurl: .689" Finish: Zinc Plated Quantity: Pack of 10Add to Cart$33.95 -
Lippert
2025027416 --- Wheel Lug Stud; 1/2"-20 x 2" - .545 Knurl - 10 pack
Wheel Stud - 1/2" - Pack of 10 - .545 Knurl Replacement wheel lug studs For 2k thur 7k hubs Thread size: 1/2"-20 UNF Length: 2" from underhead to end Knurl Diameter: 0.545" Finish: Zinc Plated Quantity: Pack of 10Add to Cart$18.95 -
Lippert
2025027417 --- Wheel Lug Stud M22 x 1.5, 4-13/16" - 10 pack
Trailer Axle Wheel Bolt - Pack of 10 Diameter of Thread: M22 x 1.5 Shoulder Length: 4-13/16" Diameter of Knurl: 1.007" Finish: Black Phosphate and Oil Quantity: Pack of 10Add to Cart$138.95 -
Lippert
2025027777 --- Coned Wheel Lug Nut - 1/2"-20 - 10 pack
Coned Lug Nuts - 1/2" - Pack of 10 Fits 1/2"-20 lug studs Type: Coned 60 Degree Finish: Zinc-Plated Quantity: Pack of 10Add to Cart$4.45 -
Lippert
2025027778 --- Coned Wheel Lug Nut - 9/16"-18 - 10 pack
Coned Lug Nuts - 9/16" - Pack of 10 Fits 9/16"-18 lug studs Type: Coned 60 Degree Finish: Zinc-Plated Quantity: Pack of 10Add to Cart$5.95 -
Lippert
2025027782 --- Flange Wheel Nut - 5/8"-18 - 10 pack
Flanged Wheel Nut - 5/8" - Pack of 10 Fits 5/8"-18 lug studs Type: Flanged Nut Finish: Zinc-Plated Quantity: Pack of 10Add to Cart$37.95 -
Lippert
2025027784 --- Swiveling Flange Nut - 5/8"-18 - 10 pack
Swivel Flanged Nut - 5/8" - Pack of 10 Fits 5/8"-18 lug studs Type: Swiveling Flange Nut Finish: Black Zinc-Plated Quantity: Pack of 10Add to Cart$30.95 -
Lippert
2025027785 --- Swiveling Flange Nut - M22 x 1.5 - 10 pack
Swivel Flanged Nut - M22 x 1.5 - Pack of 10 Fits Metric M22 x 1.5 lug studs Type: Swiveling Flange Nut Finish: Black Zinc-Plated Quantity: Pack of 10Add to Cart$110.95 -
On Sale!
Reese
550055 --- Knurled Drive-In Stud - 1/2"-13
Drive-In Stud Thread Diameter: 1/2"-13 coarse Stud Length (under head to end of threads): 1-1/2" Spline Length: 1/4" Base Length: 5/16" Spline Diameter: .54" Head Diameter: 7/8" Finish: Zinc platedAdd to CartWas: $3.45Now: $2.76 -
Dexter
7-103 --- Drum Mounting Bolt - Dexter - 1/2"
This Drum Mounting Bolt connects the drum to the hub on Dexter 9k & 10k General Duty hub group. Length: 1.75" Thread Size: 1/2" - 13 UNC Hex Flanged boltAdd to Cart$3.45 -
Dexter Marine
71-040 --- UFP by Dexter Stud Kit - 1/2"
UFP by Dexter, Replacement Studs for UFP hubs Kit includes five studs 1/2"-20 Knurl Diameter: .561" Overall Length: 2" Thread Length: 1" Knurl Length: .25" Diameter of Head: .75" Finish: Zinc PlatedAdd to Cart$24.95 -
90737 --- Knurled Drive-In Stud - 5/8"
Drive-In Stud Thread Diameter (A): 5/8" Stud Length (B): 2-15/16" Spline Length (C): .55" Base Length (D): .75" Spline Diameter (E): .68"Add to Cart$4.45 -
95188R --- Wheel Nut 5/8" - 18 Right Hand
Wheel Nut - Lug Nut 5/8" - 18 Right Hand Thread 1-1/8 Inches Across Flats Zinc Plated Flanged Wheel NutAdd to Cart$5.95 -
Dexter
CR33521 --- Clamping Ring for Flat Faced Wheel - 8 on 6.5"
Clamping Ring Bolt Pattern: 8 on 6.5" Use with Flat Faced Dually RimsAdd to Cart$64.95 -
DIS7115 --- Knurled Drive-In Stud - 5/8"
Drive-In Stud Thread Diameter (A): 5/8" Stud Length (B): 3-1/8" Spline Length (C): .56" Base Length (D): 1.29" Spline Diameter (E): .69"Add to Cart$4.95 -
Dexter
DIS7122 --- Knurled Drive-In Stud - 1/2"
Drive-In Stud Thread Diameter (A): 1/2" Stud Length (B): 2" Spline Length (C): .41" Base Length (D): .73" Spline Diameter (E): .61"Add to Cart$4.95 -
DIS7132 --- Knurled Drive-In Stud - 9/16"
Drive-In Stud Thread Diameter (A): 9/16" Stud Length (B): 2-5/16" Spline Length (C): .31" Base Length (D): 1.03" Spline Diameter (E): .69"Add to Cart$4.45 -
Dexter
DIS7223 --- Knurled Drive-In Stud - 9/16"
Drive-In Stud Thread Diameter (A): 9/16" Stud Length (B): 2" Spline Length (C): .33" Base Length (D): .75" Spline Diameter (E): .69" Finish: Zinc coatedAdd to Cart$4.95 -
Dexter
DIS7224 --- Knurled Drive-In Stud - 5/8"
Drive-In Stud Thread Diameter (A): 5/8" Stud Length (B): 2-1/2" Spline Length (C): .33" Base Length (D): 1.15" Spline Diameter (E): .69"Add to Cart$4.45 -
DIS7232 --- Knurled Drive-In Stud - 5/8" 8K Dexter
Drive-In Stud for Dexter 8k Hubs Thread Diameter (A): 5/8" Stud Length (B): 2-3/4" Spline Length (C): .31" Base Length (D): 1.24" Spline Diameter (E): .69"Add to Cart$5.95 -
Dexter
DIS7262 --- Knurled Drive-In Stud - 1/2"
Drive-In Stud Thread Diameter (A): 1/2" Stud Length (B): 2-5/8" Spline Length (C): .93" Base Length (D): 1.38" Spline Diameter (E): .54"Add to Cart$2.95 -
F19374 --- Wheel Nut 1/2 - 20 Right Hand
Wheel Nut - Lug Nut Zinc Plated 13/16 Inches Across Flats 1/2 -20 Right Hand Thread 60 Degree ConeAdd to Cart$0.99 -
HHN520 --- Wheel Nut 1/2" - 20 Right Hand
Wheel Nut - Lug Nut - Heavy1/2" - 20 Right Hand Thread7/8 Inches Across FlatsZinc PlatedHeavy Hex NutAdd to Cart$0.67 -
HN916G5ZF --- Wheel Nut 9/16" - 18 Right Hand
9/16" - 18 Right Hand Thread7/8 Inches Across FlatsZinc PlatedFlat Hex NutAdd to Cart$0.84 -
LW433 --- Excalibur Cross Lug Wrench
Traditional cross-style wrench is 20" long and features durable, corrosion-resistant chrome plating, and has 4 differently sized built in sockets.• Fits trailer wheel lug nuts with diameters of 17 mm, 3/4", 13/16" or 7/8"Add to Cart$45.95 -
RC152 --- Rim Clamp
Rim Clamp Use with WB723 Typically seen on Mobile Home axles with centerless rimsAdd to Cart$3.95 -
Dexter
SIS2511 --- Screw-In Stud - 9/16"
Screw-In Stud Thread Diameter: 9/16" Over All Length (A): 3-1/8" Hub End (B): 9/16" - 12 TPI - 3/4" Long Wheel End (C): 9/16 - 18 TPI - 1-1/2" LongAdd to Cart$3.45 -
Dexter
SIS2545 --- Screw-In Stud - 5/8"
Screw-In Stud Thread Diameter: 5/8" Over All Length (A): 2-1/2" Hub End (B): 5/8" - 11 TPI - 7/8" Long Wheel End (C): 5/8" - 18 TPI - 1-1/4" LongAdd to Cart$4.95 -
Dexter
SIS2551 --- Screw-In Stud - 1/2"
Screw-In Stud Thread Diameter: 1/2" Over All Length (A): 2.5" Hub End (B): 1/2" - 13 TPI - 1-1/4" Long Wheel End (C): 1/2" - 20 TPI - 1" LongAdd to Cart$4.45 -
Dexter
SIS2553 --- Screw-In Stud - 1/2"
Screw-In Stud Thread Diameter: 1/2" Over All Length (A): 2" Hub End (B): 1/2" - 20 TPI - 3/4" Long Wheel End (C): 1/2" - 20 TPI - 1-1/4" LongAdd to Cart$3.95 -
WB723 --- Wheel Bolt 1/2" - 13
Wheel Bolt 1/2" - 13 Wheel Bolt (Coarse Thread) Right Hand Threads Across Flats (A): 7/8" Thread Length (C): 1 - 1/2" Flat Head Length under Head (D): 2-1/4"Add to Cart$3.95 -
Dexter
WB740 --- Wheel Bolt 1/2" - 20
Wheel Bolt 1/2" - 20 Wheel Bolt (Fine Thread) Right Hand Threads Across Flats (A): 13/16" Thread Length (C): 7/8" 60 Degree Coned HeadAdd to Cart$2.95 -
Dexter
WB916 --- Wheel Bolt 9/16" - 18
Wheel Bolt 9/16" - 20 Wheel Bolt (Fine Thread) Right Hand Threads Across Flats (A): 7/8" Thread Length (C): 1-1/8" 90 Degree Coned HeadAdd to Cart$3.95 -
WN5818R --- Wheel Nut 5/8" - 18 Right Hand
Wheel Nut - Lug Nut 5/8" - 18 Right Hand Thread 1 Inch Across Flats Zinc Plated 90 Degree ConeAdd to Cart$2.45 -
WN91618 --- Wheel Nut 9/16" - 18 Right Hand
Wheel Nut - Lug Nut 9/16" - 18 Right Hand Thread 7/8 Inches Across Flats Zinc Plated 60 Degree ConeAdd to Cart$1.95
