A sway control unit is an inexpensive solution to the problem of a wandering trailer. CURT sway control units are designed to attach to your vehicle and trailer at the coupling point and counteract any lateral movement in your trailer, keeping your tow...

Weld-On Sway Control Bar. This bar can be welded onto a ball mount so a sway control can be attached between the ball mount and a trailer. Installation: Weld onto ball mount Length: 5" Width: 2" Thickness: 1/2" Hole Size: 5/8"

Replacement Sway Control Ball Sway Control Ball Diameter of Ball: 1-1/4" Size of Shank: 5/8"

This Plates mounts on the Tongue of the trailer.Weld-On or Bolt-On PlateBall Size: 1.25"Dimensions: 3" x 6-1/4"

Friction Sway Control uses friction to resist pivotal movement and thereby works against the effects of induced sway. It operates on the principle of "stiffening" the coupling between the tow vehicle and trailer. The degree of "stiffening" or friction is...

Ball Mount with Sway Control Mounting Tab Ball Mount fits standard 2" Receivers Rating: 7,500 lb Gross Towing Weight, 750 lb Tongue Weight for Drop Use with 1" shank Hitch Ball Finish: Gloss Black Powder Coat Sway Control Ball not Included, Part...

True Course Auto Sway Control System Activates trailer brakes independently of driver and brake controller to prevent side-to-side sway Plug-and-Play design for simple, stree-free installation Simply mount the module on the trailer, plug in the...

To equip your vehicle with a full Sway Control System a mounting point for the sway control bar must be attached to the hitch. With the BulletProof Sway Control Ball Mount, you can mount a sway control system between your hitch and your trailer. The sway...

This 1-1/4” ball can be used on either side of the BulletProof Sway Control Dual Ball allowing you to mount the Sway Control System to either side of the trailer.

To equip your vehicle with a full Sway Control System, a mounting point for the sway control bar must be attached to the hitch. With the BulletProof Sway Control Ball Mount, you can mount a sway control system between your hitch and your trailer to...

When towing large trailers, it is possible to experience trailer sway from wind, passing vehicles, and uneven road surfaces. To prevent the trailer from swaying, BulletProof Hitches offers a sway control system that connects from the sway control ball...

To attach a sway control system to your trailer, this Sway Control Ball plate must be mounted on the front of the trailer. This ball will allow the attachment of the Sway Control System by an R-Clip. Six tapping screws are provided for mounting the ball...

This Phantom Sway Control Plate is designed to fit on Gen-Y Ball Mounts Compatible with all Gen-Y Economy and Platinum Ball Mounts Easily make Ball Mount compatible with Sway Control Sway Control and Sway Control Balls are not included Heavy-duty,...