$104.95
$7.95
-
Peterson
LED171KA --- Amber 1" Round Sealed LED Clearance/Side Marker Light Kit - 1 Diodes - Flat (Discontinued)
LED's (Light Emitting Diodes) are devices that have no moving parts, no bulbs that burn out or break, and have no toxic gasses. LED devices do provide longer lasting performance, are more energy efficient, require lower voltages to operate, and increase... -
Fulton
TJ1500 --- FULTON Swivel Sidewind Trailer Jack with Caster - 1,500 lb (Discontinued)
This Fulton jack fits up to a 3" x 5" trailer frame. The mounting bracket and hardware are included. Maximum Support Capacity: 1,500 lb Maximum Lift Capacity: 1,500 lb Handle Style: Sidewind Finish: Zinc Plated Travel: 10" Mounting Bracket and... -
BULLDOG
500223 --- Top Bearing for BULLDOG Jacks (Discontinued)
Top Bearing or Thrust Bearing Inner Diameter: .5" Outer Diameter: 1.26" Thickness: .43" -
BULLDOG
150415 --- BULLDOG Swivel Sidewind Trailer Jack - 3,000 lb Support
BULLDOG sets the standard for round screw jacks. They operate smoothly and efficiently with easy cranking 8 turns per inch. There is no better, more reliable, field proven jack on the market. With four 90 Degree quick positions, secured by a convenient...Add to Cart$104.95 -
Dexter
92126 --- Oil Cap Rubber Plug - Hayes (Discontinued)
Use this Plug with the 92125 oil cap. Use with Oil Cap: 92125 Use with Rubber "O" Ring: 92127 -
Dexter
92125 --- Al-Ko/Hayes Oil Cap (Discontinued)
Hayes/Al-Ko oil cap Use with 92126 Rubber Plug Use with 92127 "O" Ring Hayes or Al-Ko Oil Cap, Fits 10k and12k Hubs Outside Diameter of Threads on Cap: 3.67" Overall Height of Cap: 2.9" Across Flats of Nut: 2.25" Plug Hole Diameter: 1... -
Wesbar
603PW-4FT --- 6-Way Molded Round Plug with Cable (Discontinued)
This molded connector can be used with thermo-plastic or metal 6-way vehicle end connectors. Molded Connector can be Used with Thermo-Plastic or Metal 6-Way Car End Sockets Encapsulated Terminals and Wire Form One Weather Resistant, Non-Corrosive... -
Peterson
150C --- Rectangular Sealed License Plate/Utility Light (Discontinued)
The light is designed with the lens welded to the housing to form a single unit. Rectangular Sealed Light Functions as Utility or License Plate Light Color: Clear Length: 2-1/2" Width: 1-1/4" Depth: 3/4" Made in the USA Requires Plug, Part No. 142-49 -... -
Fulton
64 --- Fulton / BULLDOG Coupler Repair Kit - Fits 2-5/16" Ball (Discontinued)
Repair kit for 44-305R Will not fit 44-305 with the lift and slide back latch system -
Peterson
150KA-G --- Rectangular Sealed Clearance/Side Marker Light Kit
This kit features a lens welded to the housing to form a single unit and includes light, grommet and plug. This light features female terminals on the back and requires additional parts to mount onto trailer. Rectangular Sealed Light Kit Functions as...Add to Cart$7.95 -
BULLDOG
171401 --- BULLDOG Swivel Topwind Trailer Jack - 5,000 lb Support (Discontinued)
BULLDOG sets the standard for round screw jacks. They operate smoothly and efficiently with easy cranking 8 turns per inch. There is no better, more reliable, field proven jack on the market. With four 90 Degree quick positions, secured by a convenient... -
BULLDOG
151101 --- BULLDOG Swivel Sidewind Trailer Jack - 3,000 lb Support (Discontinued)
BULLDOG sets the standard for round screw jacks. They operate smoothly and efficiently with easy cranking 8 turns per inch. There is no better, more reliable, field proven jack on the market. With four 90 Degree quick positions, secured by a convenient... -
Tekonsha
118157 --- Mounting Box for 6-Way and 7-Way Connectors (Discontinued)
This Mounting Box is made of high impact plastic and is attached using a hose clamp, so no drilling is required. Made of High Impact Plastic Mounts with Hose Clamp Use with 3" Square Cross Tube Hitches Corrosion Free -
On Sale!
Draw-Tite®
CA2 --- 2" Hitch Ball, 3,500 lb Capacity, Chrome Finish (Discontinued)
2" Chrome Hitch Ball Chrome Finish 3,500 lb Capacity 1-1/2" Shank Length 3/4" Shank Diameter 2" Hitch Ball Wrench Flats -
Draw-Tite®
40342 --- Ball Mount - 2" Drop - 7,500 lb Capacity (Discontinued)
Reversible Ball Mount for high or low ball height (rise or drop). Ball Mount provides 2" Drop from the top of the shank to the top of the ball platform Ball Mount provides 3/4" Rise from the top of the shank to the top of the ball platform Use with... -
On Sale!
Tekonsha
118149 --- Mounting Bracket for 4-Prong Flat Connectors (Discontinued)
Can be used to mount plug to vehicle without drilling holes in the hitch. Includes Zip Ties for Mounting Around Hitch Color: Black Fits most 4-Prong Flats Connectors -
Wesbar
78CS --- Utility Light with White Base w/Switch (Discontinued)
This compact design is surface mounted with a clear, snap-in lens and external switch. Rectangular Utility Lights Base Color: White Lens Color: Clear Surface Mounts 4 Holes on 4-1/16" Center Horizontal, 1-3/8" Vertical Includes External Switch Two-Wire... -
BULLDOG
15500 --- BULLDOG Replacement Sidewind Tube Cap (Discontinued)
Jack Tube cover. Replacement Tube Cover Diameter: 2" -
Peterson
LED171KC --- Clear 1" Round Sealed LED Utility Light Kit - 1 Diodes (Discontinued)
LED's (Light Emitting Diodes) are devices that have no moving parts, no bulbs that burn out or break and have no toxic gasses. LED devices do provide longer lasting performance, are more energy efficient, require lower voltage to operate and increase the... -
Pro™ Series
1040200 --- Solo Utility Carrier Accessory Ramp, 44" x 30" (Discontinued)
*** Ramp Only *** Must purchase cargo carrier 1040100 separately. Ramp allows items with wheels to be rolled up into the cargo basket. No more lifting. Ramp only fits 1040100 Cargo Carrier 44" x 30" Ramp Size Mesh Ramp for easy clean up Bi-fold... -
Reese
1040100 --- Solo Cargo Carrier with 48" x 32" Cargo Platform (Discontinued)
Increase your carrying capacity with this high quality Cargo Carrier from Pro Series. Note: This Product is Oversized - Special Shipping Charges Apply 48" x 32" Cargo Platform Fits Standard 2" Receivers Requires assembly Carries most Scooters,... -
BULLDOG
500106 --- Bevel Gear Kit for BULLDOG Jack (Discontinued)
Replacement Gear Kit for 139, 159 and 170 series Bulldog jacks. Outer Diameter of Gears: 1.37" Inner Diameter of Gears: .5" Thickness of Gears: .705 Teeth per Gear: 15 Both gears are identical Kit includes two gears and two roll pins -
Master Lock
UCMLHD --- Master Lock Universal Heavy Duty Coupler Lock (Discontinued)
Protect your trailer from tow away theft with this coupler Lock set from Master Lock. This heavy duty trailer coupler Lock fits 2-5/16 inch standard lip, rolled lip, straight lip, surge brake, hammer blow and UFP coupler styles. Laminated steel... -
Peterson
508C --- Tractor/Implement Light - Round (Discontinued)
Rubber molded housing cushions the recessed mounted par 36 sealed beam from shock and vibration. Universal 5/16" mounting stud and adjustable zinc-plated bracket allow mounting in any position. A single lead wire exits through the back of the housing... -
Wesbar
76C-S --- Single Interior Light (Discontinued)
12 Volt interior light with diffused lens optics. Two wire construction, supply and ground. Features a polypropylene base. Light is controlled with a switch. Interior Light Depth: 1-3/4" Height: 4-3/8" Length: 7" Replacement Bulb: B921 Replacement Lens:... -
On Sale!
BULLDOG
5B8H --- BULLDOG A-Frame Coupler - 15,000 lb Capacity - 2-5/16" (Discontinued)
The BULLDOG A-Frame coupler features a heavy-duty Collar Lok system that automatically and continuously holds the ball tight. It is designed with a hinged ball socket for easy hook up and offers a visual indication of proper closure. BULLDOG A-Frame... -
Tekonsha
119192 --- ModuLite® Ultra Protector w/Integrated Circuit & Overload Protection Trailer Light Power Module (Discontinued)
Trailer light power module supplies power to the trailer's stop, turn, tail and running lights by connecting directly to the tow vehicle's battery. The Unit is rated for up to 4.2 amps for Turns/Stops circuits and 16 amps for the Tailight circuit... -
On Sale!
Fulton
142425 --- Fulton Two Speed Trailer Winch - 3,200 lb Capacity (Discontinued)
This Fulton winch has a high strength, embossed frame that is zinc plated for maximum corrosion resistance. The XLT® Series includes stylized polypropylene shell with strap and hook as standard features. Capacity: 3,200 lb* Gear Ratios: 5.1:1... -
Tekonsha
90160 --- Tekonsha Primus IQ Brake Controller - 2, 4 & 6 Brake Systems (Discontinued)
A totally proportional electric trailer brake control, the new Tekonsha Primus IQ is self-leveling so no level adjustment is necessary. Utilizing the primary sensor technology from Tekonsha Prodigy, the Tekonsha Primus IQ now includes the Boost feature... -
Tekonsha
90885 --- Tekonsha Prodigy P2 Proportional Brake Controller - 2, 4, 6 & 8 Brake Systems (Discontinued)
The Tekonsha Prodigy P2 brake controller features new motion sensor technology. It is equipped with a sensor that detects the tow vehicle’s rate of deceleration and applies proportional braking to the trailer. It is designed with the Boost feature... -
RAM
RAM6DW --- RAM 6" Replacement Dual Wheel (Discontinued)
Includes Wheel, Nut and Bolt Please call for more details -
Dexter Marine
15210 --- Brake Actuator with 2-5/16" Coupler - 20,000 lb Capacity - Model 20 (Discontinued)
Hydraulic Brake Actuator for Drum Brakes with 2-5/6" Coupler Drum Brake Actuator with 2-5/6" Coupler Model 20 2-5/16" Coupler Maximum Capacity: 20,000 lb Maximum Vertical Load: 2,000 lb Coupler Repair Kit: 18487 Mounting: Weld On to 3" Trailer... -
Dexter Marine
43916 --- Model 6 Inner Slide Assembly with Coupler (Discontinued)
Model 6 Brake Actuator Inner Slide Includes Coupler that Fits 1-7/8" or 2" Ball Finish: Zinc Plated Legacy Brand: Dico/Titan -
Dexter Marine
43507 --- Model 6 Front Roller Cover #7500 (Discontinued)
Model 6 Brake Actuator Roller Cover for 7,500 lb Unit Finish: Zinc Plated Legacy Brand: Dico/Titan -
Buyers
ET80023 --- E-Track J-Hook (Discontinued)
Designed to hang beams and accessories from E-Track. Diameter of Hook: 3/8" Finish: Plated -
Kinedyne
ET8730 --- E-Track End Cap (Discontinued)
This end cap once installed will help keep items from catching on the ends of the E-Track. Attached with Two Bolts Dimensions: 5.17" x .73" For Use with Horizontal E or A Track Finish: Gray Plastic -
Dexter
92127 --- Hayes/Al-Ko "O" Ring (Discontinued)
"O" Ring for 92125 Hayes/Al-Ko Oil Caps Use with Oil Cap: 92125 Use with Rubber Plug: 92126 -
SW5695 --- Strap Winder (Discontinued)
Quickly and Easily wind your straps with this product. Please call for more details -
Fulton
BOHK35 --- Fold-Away Hinge Kits - 3" x 5" (Discontinued)
Are you tired of storing your new boat outside in the weather because it is just too long to fit in the garage? Are you tired of paying storage fees because your boat will not fit in the garage? If so, then this product could help you keep your boat... -
Demco
15337-97 --- Demco A-Frame Coupler - 21,000 lbs Capacity - 2-5/16" - Primed (Discontinued)
EZ to Hook Up, No Need to Lift the Lever to Hook it Up. EZ to Latch, The Lever lifts to allow the Coupler Socket to Receive the Hitch Ball. EZ to Use, Once Seated in the Coupler, the Latch Automatically Snaps to its Locked Position. Capacity: 21,000... -
Demco
12564 --- Demco EZ Latch 2" Coupler fits 3" tonuge - 10,000 lb capacity (Discontinued)
EZ to Hook Up, No Need to Lift the Lever to Hook it Up. EZ to Latch, The Lever lifts to allow the Coupler Socket to Receive the Hitch Ball. EZ to Use, Once Seated in the Coupler, the Latch Automatically Snaps to its Locked Position. Capacity: 10,000... -
Demco
12688 --- Demco Adjustable Coupler - 10,000 lbs Capacity - 2" - Zinc (Discontinued)
EZ to Hook Up, No Need to Lift the Lever to Hook it Up. EZ to Latch, The Lever lifts to allow the Coupler Socket to Receive the Hitch Ball. EZ to Use, Once Seated in the Coupler, the Latch Automatically Snaps to its Locked Position. Fits 2"... -
Hopkins
20050 --- TAP® Engager™ Break-Away Switch w/ LED (Discontinued)
The Engager™ LED break-away switch contains an integrated LED which confirms the switch is functioning properly and sufficient braking power is being sent to the trailer brakes. Replacement pin and Clip, Part No. 20051 Hoppy / Tap Model... -
Hopkins
20051 --- TAP® Replacement Engager™ Break-Away Pin & Cable (Discontinued)
Replacement Pin Overall Pin Length: 1-5/8" Pin Dimension: 7/16" tall x 3/16" wide Replacement Pin & Cable for 20010 & 20050 Break-Away Switch Hoppy / Tap Model #20051 -
Trimax
TM55 --- Trimax™ King Pin Lock (Discontinued)
Fifth Wheel King Pin Lock for Unattended Fifth Wheel Trailers. Protect your Fifth Wheel Trailer with this Rugged Weatherproof Epoxy Powder Coated Finish Lock. Two Keys Included Installs in Seconds Constructed of Heavy Gauge Alloy Designed for Unattended... -
WTB4 --- Wheel Tie-Back with Snap Hooks and D-Ring (Discontinued)
Trailering tie down straps safely secure vehicles to trailers for transportation. Width: 2" Length: 4’ Working Load Limit: 3,300 lb Snap Hooks on Each End with Adjustable D-Ring Wheel Tie-Back secures Vehicle to Trailer Through the Wheel or... -
Master Lock
STL916ML --- Master Lock Spare Tire Lock (Discontinued)
Solid Zinc and Steel Construction Chrome Plated for Corrosion Resistance Locks Over Wheel Studs up to 9/16" (14mm) Diameter For Use Only on Non-Operating Spare Tire Lug Nut Style Master Lock Model #262DAT -
Tekonsha
20023 --- 5th Wheel / Gooseneck OEM Trailer Wiring Harness - 7-Way Connector 7' (Discontinued)
7-Way OEM Socket with Wiring Harness and Mounting Bracket Weather Tight Seal Durable Plastic Shell Replacement for OEM Connectors Includes 20015 Socket with Pre-Wired Harness, 20012 Mounting Bracket & Hardware Allow Remote Trailer Wiring in Pickup... -
Hopkins
18150COILED --- 7-Way Flat Pin to 6-Way Round Adapter - Electric Brakes to Center Pin (Discontinued)
Flexcoil Adapter Durable, Blue Outer Jacket Resists Abrasion and has Excellent Coil Memory Coiled Cable Length: 3' 7-Way Flat Pin Connector Adapts to 6-Way Round Connector Increased Weatherproofing Electric Brakes to Center Pin Hoppy Model No. 47083 -
Hopkins
48480 --- 7-Way Round with Flat Pin Endurance™ Socket (Discontinued)
Hopkins introduces their most durable vehicle socket connector yet. Vehicle End = Socket 3 Year extended Warranty New, Enhanced Ergonomics and Weatherproofing Socket Includes Mounting Bracket, Hardware and Grease Packet Impact & Corrosion... -
Wesbar
3306 --- Red Waterproof Sealed Identification Light Bar (Discontinued)
Waterproof Sealed Identification light bar includes pre-wired 60" leads Waterproof Sealed Three Light Identification Bar Lens Color: Red Includes Pre-Wired 60" Leads Surface Mounts on 8-1/2" Centers Stainless Steel Bar Depth: 1-1/2" Height: 1-6/8"... -
Blue Ox
BX88130 --- Blue Ox Drop Receiver - 6" Drop (Discontinued)
Tow Bars must be used in a level position. If your motor home is not level with your towed vehicle, a drop receiver may be necessary. Lower or Raise the 2" receiver connection to allow the towbar to be level when towing. Towing capacities are rated... -
Blue Ox
BX88129 --- Blue Ox Drop Receiver - 4" Drop (Discontinued)
Tow Bars must be used in a level position. If your motor home is not level with your towed vehicle, a drop receiver may be necessary. Lower or raise the 2" receiver connection to allow the towbar to be level when towing. Towing capacities are rated... -
On Sale!
Reese
70129 --- Hitch Alignment System (Discontinued)
The SoloHitch Alignment System is the easy way to quickly align your trailer, fifth wheel or gooseneck with convenient one-person operation. Easy Alignment of Hitch Ball and Trailer Coupler Telescoping Magnetic Rods for Easy... -
Fulton
34-600 --- Fulton Fas-Lok® Zinc plated 2" Coupler for 3" Tongue - 6,000 lb Capacity (Discontinued)
Fulton has developed a convenient latching mechanism, the Fas-Lok® that allows quick and easy trailer hookup. Fulton Fas-Lok® Coupler Capacity: 6,000 lb Fits Ball Size: 2" Class 4 Rating Mounting Holes are 1/2" on 3.06" Centers Mounting:... -
Highland
1017600 --- Highland Tow Strap with Hook Ends (Discontinued)
Highland Tow straps are made of heavy duty Power Web webbing, designed to tow disabled vehicles. Highlands Power Web webbing has the ability to stretch up to 20% , then recoil back to "pop out" a stuck vehicle. Strap Width: 2" Strap Length: 20’... -
On Sale!
Draw-Tite®
CB1802215 --- Ball Mount, Combination 2" and 2-5/16" Welded Chrome Hitch Balls, 16,000 lb Maximum Capacity (Discontinued)
Ball Mount Combination with 2" Chrome Hitch Ball and 2-5/16" Chrome Hitch Ball welded onto a solid shank. 2" Hitch Ball Rating: 10,000 lb Gross Towing Weight, 1,000 lb Tongue Weight 2-5/16" Hitch Ball Rating: 16,000 lb Gross Towing Weight, 1,600 lb... -
Tekonsha
20000 --- Battery Case for 12V Rechargeable Sealed Battery - Lockable (Discontinued)
Protect your battery with this rust proof heavy duty polymer case. Quick, easy two-bolt or weldable installation on any flat surface. Galvanized metal mounting bracket and Locking bar provide secure battery protection. Installs: Two-Bolt or Weldable... -
Tow Ready
40376 --- Circuit Tester (Discontinued)
Circuit Tester Pierce Wire when Connecting Trailer Lights Circuit Tester Locates Correct Circuit Wire Coiled Ground Cable & Clip Included -
Tekonsha
90195 --- Tekonsha P3™ Brake Controller - 2, 4, 6 & 8 Brake Systems (Discontinued)
There has never been a more advanced, yet user friendly, proportional system offered for trailer braking than the New Tekonsha P3™. In additional to multiple language, color and contrast options, the LCD display features highly advanced,... -
On Sale!
Fulton
501110 --- Replacement 10" Removable Handle for Hand Winch (Discontinued)
Fulton Removable 10" Winch Handle. For use with Fulton Two Speed Winches Length of Handle: Measured from center of mounting hole to center of handle: 10" Spring loaded clip allows for easy removal and attachment Will not fit on threaded drive... -
On Sale!
Fulton
501108 --- Replacement 10" Handle for Fulton Hand Winch (Discontinued)
Replacement Jack 10" Handle. Handle Length: Center of Handle to Center of Mounting Hole is 10" Mounting Hole on Handle: Oval Hole 3/8" x 1/2" Handle has an offset bend of 1.5" Fits on threaded drive shaft -
On Sale!
Fulton
143100 --- Fulton Single Speed Winch with Automatic Brake - 1,500 lb Capacity (Discontinued)
Fulton’s K Series winch offers a self-activating automatic brake that holds the load securely when the crank handle is released. No minimum line load is needed to activate the brake or pay out cable from the winch. Capacity: 1,500 lb* Gear... -
BULLDOG
242000 --- BULLDOG Coupler Repair Kit (Discontinued)
Kit Includes Handle, Spring, Collar Clip, Locking Pin and Rivet/Retaining Ring -
Fulton
FUL2ADJ --- BULLDOG Adjustable Cast Coupler - 8,000 lb Capacity - 2" (Discontinued)
Adjustable couplers offer the flexibility of changing the coupler height to match multiple towing vehicles. BULLDOG Adjustable Coupler Fits Ball Size: 2" Capacity: 8,000 lb Class 4 Rating Finish: Painted Mounting: Mount into 2-7/8"... -
BULLDOG
4B4 --- BULLDOG 2-5/16" Coupler fits 3" tongue - 12, 500 lb Capacity (Discontinued)
The BULLDOG coupler features an automatic and continuously tight ball fit. It is designed with a hinged ball socket for easy hook up and offers a visual indication of proper closure. BULLDOG Coupler Capacity: 12,500 lb Class 4 Rating Fits Ball... -
Fulton
34-300 --- Fulton Fas-Lok® 2" Coupler fits 3" Tongue - 5,000 lb Capacity (Discontinued)
Fulton has developed a convenient latching mechanism, the Fas-Lok® that allows quick and easy trailer hookup. Fulton Fas-Lok® Coupler Capacity: 5,000 lb Fits Ball Size: 2" Class 3 Rating Finish: Primed Mounting Holes are 1/2" on 3.06"... -
Buyers
16137-14K --- Adjustable 3" Tow Ring - 14,000 lb Capacity (Discontinued)
Class IV tow ring made from ductile iron casting. This rugged tow ring has an inner diameter of 3" and a ring thickness diameter of 1-9/16". Capacity: 14,000 lb Vertical Load: 2,000 lb Ring Thickness Diameter: 1-9/16" Inner Diameter: 3" Constructed of... -
On Sale!
Brake Buddy
39494 --- Brake Buddy Classic III™ Braking System (Discontinued)
Use this Brake Buddy when towing a vehicle behind your motorhome. When you tow a vehicle behind your motorhome, the towed vehicle becomes, "dead weight" and pushes as the motorhome tries to slow or stop. In many cases, the towed vehicle puts so much... -
Reese
UTL100 --- Reese Towpower Universal Trailer Coupler Lock (Discontinued)
Universal Coupler Lock. Fits most 1-7/8", 2" and 2-5/16" Couplers Powder Coat Finish Durable Cast Body Design -
B1-S --- Double Swivel Lever Load Binder - 1/2" Chain Size (Discontinued)
This heat treated and proof tested load binder is constructed with forged heat treated hooks that support the load of the chain and will not bind. The lever style binder allows you to release the binder tension without any kickback of the handle. The... -
Wesbar
3336 --- Replacement Rectangular Lens and Side Marker Lens (Discontinued)
Replacement Lens for Part No. 3554 and 3504 Waterproof Tail Lights Sold in pairs, Includes two Tail Light Lens and two Side Marker Lens Color: Red Length: 8" Height: 2-7/8" Attachment: 4 Screw Holes -
BULLDOG
198200 --- BULLDOG Swivel Topwind Trailer Jack - 7,000 lb Support (Discontinued)
BULLDOG sets the standard for round screw jacks. They operate smoothly and efficiently with easy cranking 8 turns per inch. There is no better, more reliable, field proven jack on the market. With four 90 Degree quick positions, secured by a convenient... -
On Sale!
Tekonsha
118159 --- Mounting Box for 6-Way and 7-Way Connectors (Discontinued)
This Mounting Box is made of high impact plastic and is attached using a hose clamp, so no drilling is required. Made of High Impact Plastic Mounts with Hose Clamp Use with Square and Round Tube Hitches Corrosion Free -
Tow Ready
4PFC-60 --- 4-Prong Flat Vehicle and Trailer Ends - 60" (Discontinued)
Black Molded plastic with 16 ga. wire. Trailer End = Male Half Vehicle End = Female Half AOL: 60" -
Tekonsha
3045 --- Tekonsha & Draw-Tite Brake Control Dual Plug Wiring Harness (Discontinued)
This Wiring Harness fits all Drawtite, Reese, Tekonsha and Pro-Series brake controllers with the Plug & Play feature. It is great for vehicles that have an OEM factory harness. It's easy installation design allows you to plug directly into the... -
Draw-Tite®
5100 --- Draw-Tite Activator Electronic Brake Controller - 2 & 4 Brake Systems (Discontinued)
The Draw-Tite Activator is a 100% solid-state brake control. The simple operation, slim design and wide range of mounting options make the Activator a perfect choice for today's vehicles. There are no moving parts or pendulums to adjust. 3 Year... -
On Sale!
Tekonsha
9030 --- Tekonsha Voyager Proportional Brake Controller - 2, 4, 6 & 8 Brake Systems (Discontinued)
Tekonsha is a leading manufacturer of high quality brake controls. The Voyager is no exception. This attractive unit is easy to install and has recessed controls to protect against accidental readjustment. Its ergonomic design makes better use of space... -
Tekonsha
2018 --- Battery Case for 12V Rechargeable Sealed Battery (Discontinued)
Protect your battery with this rust proof heavy duty polymer case. This durable battery case is quick and easy to install on jackpost or A-frame of trailer. It is designed with a U-shaped clamp fastener that mounts over most trailer tongues. Installs:... -
Draw-Tite®
D190 --- Receiver Adapter, 1-1/4" to 2" (Discontinued)
The receiver adapter is perfect for cargo carriers and bike racks. NOTE: Cannot be used with Class One Hitches Length is Measured Center of pinhole to Center of Pinhole Finish: Black Powder Coat MGTW: 3,500 lb Maximum Vertical Load: 350 lb Receiver... -
Reese
74905 --- 2-5/16" Hitch Ball, 14,000 lb Capacity, Chrome Finish (Discontinued)
2-5/16" Hitch Ball 14,000 lb Capacity 2-3/4" Shank Length 1-1/4" Shank Diameter 2-5/16" Hitch Ball Chrome Finish Wrench Flats -
B&W Trailer Hitches
BW10051 --- 2" Hitch Ball Replacement for B&W Pintle Hook (Discontinued)
2" Chrome ball for B&W Tow & Stow® pintle hook, part no. BW10055 and BW20055 10,000 lb capacity 2" Hitch ball Chrome finish Shank length: 1-7/8" Shank diameter: 1-1/4" Includes nylon lock nut picture_as_pdf Download... -
Buyers
BML12 --- Trailer Hitch Receiver Lock for 1-1/4" Receiver (Discontinued)
Protect your investment against drawbar and ball mount theft with this receiver Lock. It features a covered key slot preventing corrosion in the Locking mechanism. Tough, Rugged Construction Chrome Plated Pin Black Powder Coated Lock 1/2" Diameter... -
B&W Trailer Hitches
BW10056 --- B&W 2" Shank Adjustable Pintle Hook with 2-5/16" Ball (Discontinued)
B&W Adjustable solid shank Pintle Hook with 2-5/16" Chrome Hitch Ball providing an 6" maximum drop. No more bruised shins with this unique fold under vehicle design. Made is the USA Ball Mount fits standard 2" Receivers 14" of vertical height... -
B&W Trailer Hitches
BW10055 --- B&W 2" Shank Adjustable Pintle Hook with 2" Ball (Discontinued)
B&W Adjustable solid shank Pintle Hook with 2" Chrome Hitch Ball providing an 6" maximum drop. No more bruised shins with this unique fold under vehicle design. Made is the USA Ball Mount fits standard 2" Receivers Shank Finish: Black Powder... -
Buyers
7701 --- Ball Mount, Combination 1 7/8" and 2" welded Hitch Balls, 6,000 lb Capacity (Discontinued)
Combination reversible Ball Mount with with larger hitch ball mounted in rise position 1-7/8" Hitch Ball provides 2" Drop from the top of the shank to the top of the ball platform 2" Hitch Ball provides 3/4" Rise from the top of the shank to the top... -
On Sale!
Draw-Tite®
40202 --- Ball Mount Long Shank - 4" Drop - 10,000 lb Capacity (Discontinued)
Reversible Ball Mount for high or low ball height (rise or drop). Ball Mount provides 4" Drop from the top of the shank to the top of the ball platform Ball Mount provides 2-3/4" Rise from the top of the shank to the top of the ball platform Use... -
On Sale!
Draw-Tite®
4284 --- Ball Mount Long Shank - 2" Drop - 12,000 lb Capacity (Discontinued)
Ball Mount manufactured with solid steel shank construction, wide ball platform and extra long shank. Ball Mount length is 12" from center of ball hole to center of pinhole Ball Mount provides 2" Drop from the top of the shank to the top of the ball... -
Draw-Tite®
4280 --- Ball Mount - 2" Drop - 12,000 lb Capacity (Discontinued)
Ball Mount manufactured with solid steel shank construction and wide ball platform Ball Mount length is 8-1/2" from center of ball hole to center of pinhole Ball Mount provides 2" Drop from the top of the shank to the top of the ball platform Use... -
On Sale!
Draw-Tite®
40200 --- Ball Mount - 2" Drop - 10,000 lb Capacity (Discontinued)
Reversible Ball Mount for high or low ball height (rise or drop). Ball Mount provides 2" Drop from the top of the shank to the top of the ball platform Ball Mount provides 3/4" Rise from the top of the shank to the top of the ball platform Use with... -
Draw-Tite®
1962 --- Trailer Safety Chain Loop - Class II / III (Discontinued)
Weldable Class II / III Maximum Capacity: 5,000 lb Finish: Plain -
Draw-Tite®
4234 --- Trailer Safety Chain Loop - Class I (Discontinued)
Safety Chain Loop Weldable Class I Maximum Capacity: 2,000 lb Finish: Plain
