-
Demco
03409-95 --- Demco DA20 Front Shock Pin
Demco DA20 Front shock pin Diameter of Pin: 7/8" Length of Pin: 3-7/8" Finish: Zinc Plated$11.45 -
Demco
03410-95 --- Demco DA20 Rear Shock Pin
Rear Shock Pin for DA20 Demco brake actuators. Pin Diameter: 5/8" Overall Length: 5-1/8" Diameter of Head: 13/16" Length under head to end: 4-5/8" Usable length: 4-5/8" Zinc Plated$12.95 -
Demco
03411-95 --- Demco DA20 Connecting Pin
Connecting Pin for DA20 Demco brake actuators. Pin Diameter: 7/8" Overall Length: 5.25" Diameter of Head: 1-1/16" Length under head to end: 4-15/16" Usable length: 4-5/8" Zinc Plated$12.95 -
Demco
03412-97 --- Demco DA20 Weld-On Outer Case
Demco DA20 outer case: Weld-On Outer Case Length: 19-3/4" Outer Case Width: 4-1/2" Outer Case Height: 6-1/4" Finish: Primed$174.95 -
Demco
03534X --- Demco DA20 Push Rod
Demco DA20 Push Rod Overall Length: 8-3/4" Fork Width: 2-7/8" Square behind forks: 2-7/8" x 2-1/4" Length of Fork: 2" Width of one fork: 11/16" Finish: Zinc Plated$45.95 -
Demco
03548X --- Demco DA20 Bolt-On Outer Case
Demco DA20 Outer Case: Bolt-On - 3 Hole Standard Outer Case Length: 19-3/4" Outer Case Width: 4-1/2" Outer Case Height: 6-1/4" Finish: Zinc Plated$213.95 -
Demco
03734-95 --- Demco DA91 Centered Clevis Channel
DA91 Inner Slide Centered 4 Hole channel Finish: Zinc Plated Insert Size: 3"x3" Inner Slide for Model DA91 Demco Actuators$100.95 -
Demco
03734-97 --- Demco DA91 & DA91BZ Centered Clevis Channel
DA91 Inner Slide Centered 4 Hole channel Finish: Primed Insert Size: 3"x3" Inner Slide for Model DA91 Demco Actuators$82.95 -
Demco
03866-95 --- Demco Emergency Lever Guide
Emergency Lever Guide Fits Demco Brake Actuators: DA91, DA10, DA20, and DA86 Will not fit Dexter A160/A200 actuators, not same size$7.95 -
Demco
03876X --- Demco Master Cylinder Cap w/Diaphragm & O-Ring
Demco Replacement Master Cylinder Cap Fits the Demco models DA66, DA70, DA86, DA10, DA20, DA91BZ and DA91 Includes built in diaphragm Includes O-ring$19.95 -
Demco
03884-97 --- Demco DA20 Weld-On A-Frame Outer Case
Demco DA20 A-frame outer case: Weld-On Outer Case Length: 19-3/4" Outer Case Width: 4-1/2" Outer Case Height: 6-1/4" 50 Degree Angle for mounting on tongue Finish: Primed$188.95 -
Demco
05408X --- Demco 3/32" Cable with Hook - 42-1/2"
Yoke on one end for hooking to the brake actuator emergency lever and a 3/8" safety clip hook on the other end. Over All Length: 42 1/2" 3/8" Hook with Safety Clip not a Replaceable Item Fits DA91, DA91BZ, DA10 and DA20 Brake Actuators Demco has...$14.45 -
Demco
05426X --- Demco DA91 Front Shock Pin
Demco DA91 Front Shock Pin Pin Diameter: 5/8" Overall Length: 3-9/16" Working Length, under head to cotter pin hole: 3-1/8"$12.95 -
Demco
05679X --- Master Cylinder Connector - 1/8" Hole
Inverted Flare Adapter - Screws into the back of a master cylinder to allow a 3/16" brake line to connect to the master cylinder Required on both Demco Master Cylinders: 5672 & 05680X 1/8" Pipe - 3/16" Inverted Flare Fitting with 1/8"...$2.95 -
Demco
05680X --- Demco Drum Brake Master Cylinder Kit w/Gasket
Replacement Master Cylinder for Demco Brake Actuators. For Use with Drum Brakes Only. Fits only Demco brake actuators For use with Drum Brakes Only Kit includes mounting hardware, gasket, cap, rubber boot and cover plate Diaphragm in master...$62.95 -
Demco
05684X --- 1/2" Hex Head Bolt, Grade 5
Hex Head Zinc Plated bolt with Short Thread Span Bolt Diameter: 1/2" Bolt Length: 4-7/16" Thread Length: 5/8" Hex Head Bolt Finish: Zinc Plated Used on Demco Brake Actuators DA66, DA70 & DA86: Quantity Required: 2$14.45 -
Demco
05687X --- Demco Master Cylinder Protective Boot
Protective boot for Demco Master Cylinders Fits Demco Master Cylinders: 5672 & 05680X$5.95 -
Demco
05692X --- Demco DA66, DA70 & DA86 Damper Shock
Fits the following Brake Actuators: Demco DA66 - One Required Demco DA70 - One Required Demco DA86 - One Required Small Ring: 7/16" I.D. Large Ring: 1/2" I.D. Center of ring to center of ring, collapsed: 4-3/4" Diameter of Body:...$64.95 -
Demco
05693-95 --- Demco Emergency Lever Spring
Demco Emergency Lever Spring Fits Demco DA66, DA70, DA86, DA91, DA10, and DA20 brake actuators Will not fit Dexter A160/A200 actuators, not same size$3.45 -
Demco
05849X --- Demco O-Ring for Master Cylinder Cap
Fits Demco models DA10, DA20, DA91BZ and DA91 Use with Demco screw in master cylinder cap, part number: 03876X Size: OD 1-1/16 x ID 7/8"$1.45 -
Demco
05951X --- Demco Emergency Lever
Demco Breakaway Lever Fits DA66, DA86, DA91, DA10 and DA20 Brake Actuators Will not fit Dexter A160/A200 actuators, not same size Zinc plated Demco has designed its emergency lever and brake away systems to adhere to Federal Code [FMCSR Title 49,...$11.45 -
Demco
05973X --- Demco DA10 Front Shock Pin
DA10 Front Shock Pin Length: 3-3/8" Diameter: 7/8" Finish: Zinc Plated$7.45 -
Demco
05974X --- Demco DA10 Rear Shock Pin
Rear Shock Pin for DA10 Demco brake actuators. Pin Diameter: 5/8" Overall Length: 4-9/16" Diameter of Head: 13/16" Length under head to end: 4-3/8" Usable length: 4-1/8" Zinc Plated$9.95 -
Demco
05986X --- Demco DA10, DA91 & DA91BZ Connecting Pin
Connecting Pin for Demco DA91, DA91BZ and DA10 brake actuators Pin Diameter: 7/8" Overall Length: 4-3/4" Diameter of Head: 1-1/16" Length under head to end: 4-7/16" Usable length: 4-1/8" Zinc Plated$17.95 -
Demco
05989X --- Demco DA10 Push Rod
Demco DA10 Push Rod Overall Length: 8-3/4" Fork Width: 2-1/2" Square behind forks: 2-1/2" x 2-1/4" Length of Fork: 2" Width of one fork: 1/2" Finish: Zinc Plated$45.95 -
Demco
07132X --- Demco DA91 & DA91BZ Push Rod
Demco DA91 Push Rod Overall Length: 7-1/4" Square plate: 3" x 2-3/4" Finish: Zinc Plated$43.95 -
$1.45
-
Demco
07283X --- Flat Washer for Demco Brake Actuator Reverse Lockout Solenoid
Flat Washer for Demco's Inline Reverse Lockout SolenoidFinish: Zinc PlatedInstalls between the Master Cylinder and Reverse Lockout$0.60 -
Dexter Marine
10209 --- Nylon Wear Button - DX8.0 & DX12.5
Nylon Wear Button - DX8.0 (Model 6) & DX12.5 (Model 10) Quantity Required For DexMarine DX8.0 (Model 6) Actuator: 2 Quantity Required For DexMarine DX12.5 (Model 10): 6 Nylon Wear Button Thickness: .125" DexMarine Part Number:...$2.95 -
Dexter Marine
10271 --- Master Cylinder DexMarine DX8.0
DexMarine DX8.0 Brake Actuator Master Cylinder When replacing master cylinder is it recommend to also replace the brass fitting, Part # 12098 Recommended New Brass Fitting, Part #12098 DexMarine Part Number: 068-014-00 Legacy Brand: Dico/Titan...$152.95 -
Dexter Marine
10274 --- Spring DX8.0
DexMarine DX8.0 Brake Actuator Spring Quantity Required Per Actuator: 2 Finish: Zinc Plated DexMarine Part Number: 046-180-00 Legacy Brand: Dico/Titan Model 6$13.45 -
$24.95
-
Dexter Marine
10526 --- Breakaway Lock - Left DX12.5 & DX20EX
DX12.5 (Model 10) & DX20EX (Model 20) Brake Actuator Left Hand Breakaway Lock Finish: Zinc Plated DexMarine Part Number: 068-015-00 Legacy Brand: Dico/Titan$8.45 -
Dexter Marine
10527 --- Breakaway Lock - Right DX12.5 & DX20EX
DX12.5 (Model 10) & DX20EX (Model 20) Brake Actuator Right Hand Breakaway Lock Finish: Zinc Plated DexMarine Part Number: 068-016-00 Legacy Brand: Dico/Titan$8.45 -
Dexter Marine
10541 --- Breakaway Lever Assembly DX12.5 & DX20EX
DX12.5 (Model 10) & DX20EX (Model 20) Brake Actuator Breakaway Lever Assembly Finish: Zinc Plated DexMarine Part Number: 068-017-00 Legacy Brand: Dico/Titan$28.95 -
Dexter Marine
10552 --- Weather Seal DX12.5 & DX20EX
DX12.5 (Model 10) & DX20EX (Model 20) Brake Actuator Weather Seal Finish: Rubber DexMarine Part Number: 068-019-00 Legacy Brand: Dico/Titan$3.95 -
Dexter Marine
10553 --- Outer Case DX20EX
DX20EX (Model 20) Brake Actuator Outer Case Finish: Painted DexMarine Part Number: 068-020-01 Legacy Brand: Dico/Titan$242.95 -
Dexter Marine
10555 --- Brake Actuator S-Hook
Brake Actuator S-Hook Actuator S-Hook fits current Dico models and old style Demco models Fits DexMarine DX8.0, DX12.5 and DX20EX Finish: Zinc Plated Legacy Brand: Dico/Titan; Model 6, Model 10 and Model 20$2.95 -
Dexter Marine
10582 --- Inner Slide w/ Channel - DX20EX
Brake Actuator Inner Slide with Channel - DX20EX (Model 20) Length: 16.75" Width: 3-9/16" Height: 4-9/16" Finish: Painted DexMarine Part Number: 068-025-01 Legacy Brand: Dico/Titan Model 20$321.95 -
$31.95
-
Hydro-Act
10614 --- Hydro-Act Actuator Master Cylinder
Master Cylinder Includes Cap, Cap Gasket and Fittings Mounting Holes, Center to Center: 3.5"$125.95 -
Hydro-Act
10614-M --- Hydro-Act Actuator Master Cylinder - Marine Finish
Master Cylinder Includes Cap, Cap Gasket and Fittings Marine Finish Mounting Holes, Center to Center: 3.5"$159.95 -
$244.95
-
Demco
11042-97 --- Demco DA20 8" Channel Down - Primed
DA20 Inner Slide with Channel Inner Slide with 4 Hole Channel Down Position Fits DA20 Demco Actuators Finish: Primed Insert Size: 3.5" x 5"$123.95 -
Demco
11043-97 --- Demco DA20 Flat Plate Centered - Primed
DA20 Inner Slide with Flat Plate. Inner Slide with Flat Plate Flat Plate has 5 vertical hole sets Hole Diameter: 5/8" Distance Between Vertical Holes: 2.25" Distance Between Horizontal Holes: 4.5" Center Position Total Plate Width: 6" Total Plate...$123.95 -
Demco
11044-97 --- Demco DA20 Centered Clevis Channel
DA20 Inner Slide Inner Slide for Model DA20 Demco Actuators Centered 4 Hole channel Finish: Primed Insert Size: 3.5"x5"$123.95 -
Demco
11047-95 --- Demco DA20 12" Channel Down - Zinc Plated
DA20 Inner Slide with Channel Inner Slide with 6 Hole Channel Down Position Fits DA20 Demco Actuators Zinc Plated Insert Size: 3.5" x 5"$135.95 -
Demco
11047-97 --- Demco DA20 12" Channel Down - Primed
DA20 Inner Slide with Channel Inner Slide with 6 Hole Channel Down Position Fits DA20 Demco Actuators Finish: Primed Insert Size: 3.5" x 5"$127.95 -
Demco
11049-95 --- Demco DA20 12" Centered Clevis Channel - Zinc
DA20 Inner Slide Inner Slide for Model DA20 Demco Actuators 6 Hole Channel 12" Tall Finish: Zinc Plated Picture shows Zinc Plated model Insert Size: 3.5" x 5" Overall Length: 17-1/4"$147.95 -
Demco
11049-97 --- Demco DA20 12" Centered Clevis Channel - Primed
DA20 Inner Slide Inner Slide for Model DA20 Demco Actuators 6 Hole Channel 12" Tall Finish: Primed Red Picture shows Zinc Plated model Insert Size: 3.5" x 5" Overall Length: 17-1/4"$147.95 -
Demco
11052-97 --- Demco DA10 Flat Plate - Primed
Inner Slide for DA10 with Flat Plate. DA10 Inner Slide Finish: Prime Flat Plate 5 sets of holes$104.95 -
Demco
11053-95 --- Demco DA10 Centered Clevis Channel - Zinc
Inner Slide for DA10 with centered channel Inner Slide for Model DA10 Demco Actuators Centered 4 Hole channel Finish: Zinc Plated Insert Size: 3"x5"$114.95 -
Demco
11053-97 --- Demco DA10 Centered Clevis Channel - Primed
DA10 Inner Slide Inner Slide for Model DA10 Demco Actuators Centered 4 Hole channel Finish: Primed Insert Size: 3"x5"$104.95 -
Demco
11058-95 --- Demco DA10 Channel Down - Zinc
Inner Slide for DA10 with Channel Down DA10 Inner Slide Finish: Zinc 4 Hole Down Channel Channel Position: down$116.95 -
Demco
11058-97 --- Demco DA10 Channel Down - Primed
Inner Slide for DA10 with Channel Down DA10 Inner Slide Finish: Primes 4 Hole Down Channel Channel Position: down$104.95 -
Demco
11060-95 --- Demco DA10 12" Channel Down - Zinc
DA10 Inner Slide 6 Hole Channel in Down Position Finish: Zinc Insert Size: 3"x5" Inner Slide for Model DA10 Demco Actuators$124.95 -
Demco
11068-97 --- Demco DA10 Weld-On Outer Case
Demco outer case for DA10 - Weld-On DA10 Outer Case Outer Case Length: 16-1/4" Outer Case Width: 4" Outer Case Height: 6-1/4" Finish: Primed$109.95 -
Demco
11076-95 --- Demco DA91 8" Channel Down - Plated
DA91 Inner Slide. 4 Hole channel in Down Position Finish: Zinc Plated Insert Size: 3"x3" Inner Slide for Model DA91 Demco Actuators$90.95 -
Demco
11078-95 --- Demco DA91 Inner Slide Only - Plated
DA91 Inner Slide Only Inner Slide Only for Model DA91 Demco Actuators Use with bolt-on coupler Finish: Zinc Plated Insert Size: 3"x3"$68.95 -
Demco
11079 --- Demco DA91 Drop Inner Slide Only - Plated
DA91 Inner Slide Only with DropDrop Inner Slide Only for Model DA91 Demco ActuatorsUse with bolt-on couplerFinish: Zinc PlatedInsert Size: 3"x3"$77.95 -
Demco
11079-97 --- Demco DA91 Drop Inner Slide Only - Primed
DA91 Inner Slide Only with DropDrop Inner Slide Only for Model DA91 Demco ActuatorsUse with bolt-on couplerFinish: PrimedInsert Size: 3"x3"$77.95 -
Demco
11082X --- Demco DA10 Bolt-On Outer Case
Demco outer case for DA10 with three hole standard bolt pattern DA10 Outer Case Outer Case Length: 16-1/4" Outer Case Width: 4" Outer Case Height: 6-1/4" Finish: Zinc plated$175.95 -
Demco
11084-95 --- Demco DA10 Bolt-On Outer Case - 5 Hole Mount
Demco outer case for DA10 with five hole standard bolt pattern DA10 Outer Case Outer Case Length: 16-1/4" Outer Case Width: 4" Outer Case Height: 6-1/4" Finish: Zinc Plated$164.95 -
Demco
11088-97 --- Demco DA10 Weld-On Outer Case 50 degree A-Frame Mount
Demco DA10 A-frame outer case: Weld-On Outer Case Length: 16-1/4" Outer Case Width: 4" Outer Case Height: 6-1/4" 50 Degree Angle for mounting on tongue Finish: Primed$165.95 -
Demco
11101X --- Demco DA91 Weld-on Outer Case
Demco DA91 outer case: Weld-On Outer Case Length: 18" Outer Case Width: 3-7/8" Outer Case Height: 4" Finish: Primed$81.95 -
Demco
11163-97 --- Demco DA91 Weld-on Outer Case 50 Degree A-Frame
Demco DA91 A-frame outer case: weld-on Outer Case Length: 18" Outer Case Width: 3-7/8" Outer Case Height: 4" 50 Degree Angle for mounting on tongue Finish: Primed$133.95 -
Demco
11164-95 --- Demco DA91 Bolt-on Outer Case
Bolt-On Outer Case for DA91 Outer Case Length: 18" Outer Case Width: 3-7/8" Outer Case Height: 4" Finish: Zinc Plated$96.95 -
Demco
11674 --- Demco DA10, DA66, DA86 and DA91 Solenoid Cover
Metal Solenoid Cover for Demco Brake Actuators DA10, DA66, DA86 and DA91 Cover bolts on back side of outer case$10.95 -
Dexter Marine
12098 --- Master Cylinder Connector - 1/64" orfice
Inverted Flare Fitting - Screws into the back of a master cylinder to allow a 3/16" brake line to connect to the master cylinder 1/8" Pipe - 3/16" Inverted Flare Fitting w 1/64" Orifice Use with Drum Brakes Only Finish: Brass DexMarine Part Number:...$10.95 -
Demco
12103 --- Demco DA66, DA70 & DA86 Actuator Roller
Rear Roller Spacer Outer Diameter: 2-1/2" Inner Diameter: 1/2" Width: 13/16" Quantity Required: 2 per Actuator for Demco DA66, DA70 & DA86 Actuators$8.95 -
Demco
12151 --- Demco DA66, DA70 & DA86 Actuator Front Roller Spacer
Front Roller Spacer Inner Diameter: 1/2" Outer Diameter: 7/8" Thickness: 3/8" Use with Demco DA66, DA70 and DA86 Brake Actuators: Quantity Required: 2 per Actuator$1.95 -
Demco
12187 --- Demco DA66 & DA70 Front Cover
Black Composite Front Cover for Demco DA66 & DA70 Cover snaps onto outer case$10.45 -
Demco
12193 --- Demco DA66, DA70 & DA86 Push Rod
Push Rod for Demco Brake Actuators: DA66, DA70 & DA86 Fits: DA66, DA70 & DA86$23.95 -
Demco
12200 --- Demco 3/32" Cable with Hook - 31"
Yoke on one end for hooking to the brake actuator emergency lever and a 3/8" safety clip hook on the other end. Overall Length: 31" 3/8" Hook with Safety Clip not a Replaceable Item 3/32" Diameter Cable Includes mounting hardware, nut and...$10.45 -
Demco
12267-95 --- Demco DA66B & DA70 Solenoid Cover
Metal Solenoid Cover for Demco Brake Actuators DA66 and DA70 Cover bolts on back side of outer case$9.45 -
Demco
12396 --- Demco Rue Ring Lock Cotter Pin - 5/8"
Rue Ring Cotter Pin Lock Fits 5/8" pin DA91, DA10 and DA20 actuators require one each$3.45 -
Demco
12397 --- Demco Rue Ring Lock Cotter Pin - 7/8"
Rue Ring Locking Cotter Pin Fits 7/8" diameter pin DA91 and DA91BZ actuators requires one DA10 and DA20 actuators require two$3.95 -
Demco
12426 --- Demco & DexMarine Damper Shock
This Damper Shock fits the following Brake Actuators: Demco DA10 - Two Required Demco DA20 - Two Required Demco DA91 - One Required Demco DA91BZ - One Required DexMarine DX8.0 (Dico/Titan Model 6) - One Required DexMarine DX12.5 (Dico/Titan Model...$44.95 -
Demco
12427 --- Nylon Wear Button .075" Thick - DX12.5
Nylon Wear Button - DX12.5 Quantity Required Per DexMarine DX12.5 Actuator: 8 For use on the Sides of the Inner Slide, 4 per side Thickness: .075" Legacy Brand: Dico/Titan Model 10$0.93 -
Dexter Marine
12489 --- External Star Lockwasher - 5/16"
External Tooth Lock Washer Diameter: 5/16" Finish: Zinc plated External Tooth Washer For use on Demco DA66, DA70, DA86, DA91, DA91BZ, DA10, DA20 Brake Actuators. Quantity Required for Demco Models: 2$2.95 -
Dexter Marine
12503 --- Master Cylinder Cap ONLY DX12.5 & DX20EX
DX12.5 (Model 10) & DX20EX (Model 20) Brake Actuator Master Cylinder Cap Filler Cap with Diaphragm and O-Ring Finish: Plastic Height: 1-3/8" Cap Diameter: 1-3/4" Thread Diameter: 1-5/8" DexMarine Part Number: 068-250-01 Legacy...$12.95 -
Dexter Marine
12552 --- External Star Lock washer - 3/8" DX12.5 & DX20EX
DX12.5 (Model 10) & DX20EX (Model 20) Brake Actuator 3/8" Star Lock washer Quantity Required for DX12.5 Actuator: 1 Quantity Required for DX20EX Actuator: 2 Finish: Zinc Plated DexMarine Part Number 005-083-00 Legacy Brand: Dico/Titan$2.95 -